??亚洲城游戏中心??

hotline

Your location: Conveyor> News Center> News Center

Brief introduction of bucket elevator

Bucket elevator can transport bulk materials vertically or obliquely. It is characterized by small cross-section size, small footprint, compact transportation system layout, large lifting height, and good sealing. The disadvantage is that the sensitivity of the overload is large, and the bucket and the chain are easily damaged.

The working principle of the bucket elevator is that the hopper lifts the material from the storage below, and as the conveyor belt or chain is lifted to the top, it goes down after bypassing the top wheel, and the bucket elevator dumps the material into the receiving tank. Inside. The driving belt of the bucket elevator with transmission is generally a rubber belt, which is installed on the lower or upper driving roller and the upper and lower redirecting roller. Chain-driven bucket elevators are generally equipped with two parallel transmission chains, with a pair of transmission sprocket wheels on the top or bottom, and a pair of redirecting sprocket wheels on the bottom or top. Bucket elevators are generally equipped with an organic shell to prevent dust from flying in the bucket elevator.

Fang Da bucket elevator features:
1. Wide lifting range. This type of hoist has less requirements on the type and characteristics of materials. It can not only lift general powdery and small granular materials, but also lift more sharp materials. It has good sealing and less environmental pollution.
2. Long service life, the feeding of the hoist adopts the inflow type, no need to dig the material with bucket, and the phenomenon of squeeze and collision between the materials rarely occurs. This machine is designed to ensure that materials are rarely scattered during feeding and discharging, reducing mechanical wear.
3. Good operation reliability, advanced design principles and processing methods ensure the reliability of the whole machine operation, and the failure-free time is more than 20,000 hours. High lifting height. The hoist runs smoothly, so it can reach a high lifting height.
4. The driving power is small, using inflow feeding, inductive discharging, and large-capacity hopper intensive arrangement. When the material is lifted, there is almost no return and excavation, so there is less invalid power.

Zhengzhou Stone is specialized in producing conveying equipment, crushing equipment , drying equipment and milling equipment. Advanced technology and quality assurance, customers are welcome to come to buy. Phone: 13838159488 0371-60630097 Contact: Manager Jin

related ??亚洲城游戏中心??

七乐彩 欢乐拼三张 欢乐拼三张 星力捕鱼